Bison Kombi Fast - 2 Component Glue

Bison Kombi Fast is a high-quality 2K epoxy adhesive specially developed for situations where speed and strength are important. The adhesive is ready-to-use in a practical dual syringe, which automatically mixes the two components in the correct ratio.

After application, the adhesive begins to cure within 5 minutes, making it ideal for quick repairs on a variety of materials, including metal, wood, ceramic, glass, stone, and various plastics. The adhesive dries clear and is suitable for both indoor and outdoor use.

Benefits and applications of Bison Kombi Snel

Applications:

• Repair of furniture, tools and appliances

• Bonding of various materials in and around the home, suitable for quick and strong repairs of items such as tableware, jewelry, flower pots, and statues, both indoors and outdoors. Bonds stone, earthenware, porcelain, plaster, concrete, ivory, metal, wood, and certain plastics (Formica, polyester, Bakelite). Can be used both with and without adhesives.

• Ideal for quick jobs where precision and strength are required

• Not suitable for polyethylene (PE), polypropylene (PP), Nylon (PA), silicone and PTFE.

Advantages:

• Very fast curing (hand-tight after 5 minutes)

• Transparent finish

• Ideal for uneven fractures due to its filling capacity

• Resistant to water, oil and temperature fluctuations

• Easy to use with handy dosing syringe

Of Bison Kombi Fast You'll have a reliable epoxy adhesive that effortlessly combines speed and strength. A must-have for any DIY enthusiast or professional.

Features:

• crystal clear
• fast
• strong
• filling
• temperature resistant from -40 to +100 degrees Celsius
• (sea)water resistant
• chemical resistant
• can be painted over after curing
• suitable for indoor and outdoor use

Instructions for use

1. First, lightly sand the materials to be bonded. Ensure that the surfaces are dry, clean, dust-free, and grease-free. For optimal results, degrease with Bison Degreaser or acetone.
2. Push the cap out of the center of the red handle and remove the spatula from the side of the double syringe. Then break off the temporary cap at the bottom of the syringe.
3. Inject both liquids into the mixing tray in equal volumes. Then, mix the adhesive thoroughly with the included spatula for 30 seconds to 1 minute until a homogeneous paste is formed. The mixture can be used for approximately 5 minutes.
4. Apply the adhesive to one side. Join the parts together immediately and hold them in place for about 20 minutes. Complete curing takes approximately 1 hour (at 23 degrees Celsius).
5. remove wet stains with warm water and soap
6. use a piece of tape to hold the glued parts in place while the glue cures